Natural Kote V2 ENAMEL Acrylic Urethane Paint for Interior & Exterior applications on wood, metal and fiberglass. Non-hazardous

Why buy paint online?   All of our A&L Paint Co. products are shipped to you FRESH, directly from the small batches of premium paints and stains made on an Amish Farm in Pennsylvania and shipped directly to you from the manufacturer!

Virtually unlimited color options.   Choose from any of the colors presented on the Color Guild website (link below), any color in our "Color is ... Fanbook" (available by mail) or A&L Paint Co LLC can match any color from any known competitor's colors charts with ease FREE OF CHARGE.   Just write in the color choosen from our selection or the Color Is... Fanbook by color name and color number OR write in the brand (or source), of the color you have found elsewhere and the color name & color number you want matched.   

Click this link to see the 1300 colors available at Color Guild (This will take you off of our webstie and you will need to return to this website with "color name" and "color number" to purchase your paint)

or

Click here to view and or purchase special

Semi-Transparent Stain Colors!

V2 Enamel Urethane Paint was designed for use in high production, quick turn around in shed and furniture manufacturing. It works great for exterior and interior applications and is also an excellent choice for exterior fiberglass and metal entrance doors, overhead doors, trim and decorative painting. It is non-hazardous, almost odorless and easily cleans up with water.

V2 Enamel Urethane Paint is fast drying and easy spraying with unique self leveling technology.

For use on primed siding, wood, metal, fiberglass and PVC. Also works great for exterior doors & trim.

Application Instructions

Temperature
The ideal room and product temperature is between 60- 80 degrees. Warmer room air temperatures may cause the coating to dry too quickly at the edges of the spray fan causing a dusty over spray. Cooler temperatures will slow drying times. The NaturalKote V2 Enamel temperature should be similar to the room temperature for best results. Substrate temperature should be consistent with the room and coating temperature. The siding must be dry and free of dirt or dust. Consistent temperatures of the spray room, coating and substrate are important for the proper application of NaturalKote V2 Enamel.

Equipment
Spray equipment must be maintained and working properly for best results. We recommend using a 415 or 417 tip. Equipment recommendations are general and can vary with the personal preferences and requirements of each person doing the application. We recommend that those doing the application experiment with different tips and find what works best for your situation and circumstances.

Application
Stir/Mix thoroughly before using. For semi-transparent look apply one coat on pre-primed surfaces. For solid look apply two coats. We recommend two coats on previously unpainted surfaces. Allow the first coat to dry before applying a second coat. We recommend priming bare metal with a rust inhibiting primer then apply two coats of NaturalKote V2 Enamel. Begin by making sure your sprayer pressure is correct. Spray a test panel and lower the sprayer pressure until there are fluid streaks at the outside edge of the spray fan. Gradually increase the pressure until the streaks go away. Make a note of the pressure for future reference.

Different sprayers may require different pressures so be sure to test a new or different sprayer before spraying a barn.

Apply the first coat with even, up and down strokes holding the spray fan in the center of each groove in the siding. Fan width and coating volume may vary a little depending on your tip and equipment but with the recommended tip sizes there should be very little difference. Wait until the first coat has dried enough to be just a little tacky and apply the second coat. Apply the second coat a little heavier than the first by going a little bit slower.

Ventilation
Ventilation of the spray room is critical for timely drying of the NaturalKote V2 Enamel. The spraying process of this waterborne coating creates moisture in the air that needs to be ventilated out of the room for quicker drying. Air movement needs to be through and out of the spray room, not just around the spray room. The best way to do this is to have a fresh air intake of some kind, even if it’s a window or door, and exhaust fans at the other end of the room blowing air to the outside. The more moisture you move out of the spray room with ventilation the quicker the coating will dry. The less air you move through the longer it will take to dry. Humid and colder air will slow drying times.

Product type: Waterbased Urethane/Acrylic

V2 Enamel Urethane Paint

Limited Warranty
V2 Enamel Urethane Paint
A&L Paint Co., LLC (the “Company”) warrants to the purchaser that this product, when used in accordance with the label, storage, and application instructions will not: 1) blister or peel from properly prepared and primed surfaces; 2) wear down or weather to expose the previously painted surface. This warranty shall be effective for a period of ten (10) years from the date of purchase. This warranty is non-transferrable from the original residential purchaser. If the product fails to function as set forth above, the company will, upon presentation of proof of purchase, refund the original purchase price or replace the product, whichever the company elects. THIS LIMITED WARRANTY EXCLUDES APPLICATION ON A FENCE, DECK, OR RAILING. THIS LIMITED WARRANTY ALSO EXCLUDES THE COST OF LABOR FOR APPLICATION, REMOVAL OR REAPPLICATION OF PAINT. COMPANY SHALL IN NO EVENT BE LIABLE FOR INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES.