Windmill Replacement Parts: Heads (houses), Flower Baskets, Fans, Tails, Towers, Blade & Fan Brackets, etc for Small, Medium & Large BYC Windmills

Windmill Replacement Parts:  Heads (houses), Flower Baskets, Fans, Tails, Towers, Blade & Fan Brackets, etcetera sized to fit the Small, Medium & Large BYC Windmills,  (If a windmill starts with "BDW", it comes from a different Amish Craftsman and is probably not be compatible with these parts.)   Some assembly required.

Head = The house shaped box at the top of the windmill. 

Full Top & Fan Replacement = Everything above the tower. 

Flower Basket = The porch or protrusion a few inches above the bottom of the windmill with a wavy top edge is the "flower basket"

Fan Blades (only) = The large wooden windmill fan blades without the hardware.  This is two pieces.   

Tail = The arrow shaped tail and wooden shaft which is a part of it. 

Tower = The main body of the windmill without the head or any other moving parts

Blade Brackets = This is the portion of the hardware that connects the fan blades to each other and includes the bearing that allows the blades to rotate. 

Fan Bracket = The part of the hardware that allows the Blade Bracket to be connected to the house.   The full bracket assembly is made up of the parts.  The Blade Bracket slides onto the Fan Bracket which holes the blades and blade bracket onto the windmill.   These can be purchased individually or as a set.  If both halves are needed, it is more practical to purchase them together as both will ship for the same cost as the individual shipping.    

Blade & Fan Bracket Set = Both of the previous parts together.  

Center Block

Straight Stub Shaft 

Plate with Bearing = The hardware between the head and the tower that allows the head to be connected to the tower but also to turn freely.